如何做好气象物资装备供应管理     

蒋冬雁  陈平 《气象研究与应用》2019,40(1):115-117

气象事业的发展离不开先进的设备,做好气象物资的供应管理是保障气象发展的前提,是气象业务顺利开展的重要保障。加强气象物资的供应管理才能使各种物资最大限度的发挥作用,让各种物资达到最佳组合,节约资源,降低成本。本着节约、环保、高效的原则,依据《气象技术装备管理办法》,做好物资计划、采购、储备、配送等工作。本文主要简述基于节约、环保、高效原则,如何做好气象装备的储存、保管、供应各环节的工作。  相似文献   

水射流破碎南海含水合物沉积物数值模拟研究          下载免费PDF全文

潘栋彬  陈晨  杨林  靳成才  李曦桐  刘书源  陈勇  朱江 《探矿工程》2018,45(10):27-31

为研究高压水射流切割、破碎南海天然气水合物储层的过程,采用著名的LS—DYNA显示动力分析有限元程序,对淹没状态下,水射流破碎海底含水合物沉积物过程进行数值模拟研究,研究了不同射流速度对高压水射流作用下含水合物沉积物破碎效果的影响规律。随着射流速度的增大,冲蚀深度逐渐增大,两者呈线性递增关系。含水合物沉积物冲蚀体积是轴向冲蚀与径向冲蚀共同作用的结果,射流速度越大,对含水合物沉积物的轴向与径向冲蚀作用增强,加大了含水合物沉积物冲蚀体积递增速率。  相似文献   

Velocity and anisotropic structure in the crust-upper mantle beneath South China and its implications for deep mineralization     

Guoming Jiang  Guibin Zhang  Hongyi Li  Changrong Zhang 《《地质学报》英文版》2018,92(Z1):219-219

  相似文献   

A model for the representation of emergency cases     

Chao Zhang  Jiansong Wu  Chao Huang  Bo Jiang 《Natural Hazards》2018,90(1):337-348

The aim of this paper is to propose a location model of earthquake emergency service depot on the basis of hybrid multi-attribute decision-making method. The advantage of the proposed method is that practical mixed uncertainty of location decision information is considered, and the corresponding factors that affect the location of transfer stations are contained. To solve the location problem, a hybrid multi-attribute decision procedure without information transformation is developed. Besides, a novel weighting method and aggregation process is given. Finally, a numerical example is provided to show the feasibility and validity of the proposed method.  相似文献   

Study on the Development Laws of Bed-Separation Under the Hard-Thick Magmatic Rock and its Fracture Disaster-Causing Mechanism     

Jin-quan Jiang  Bin Xu 《Geotechnical and Geological Engineering》2018,36(3):1525-1543

Based on the analysis of dynamic phenomena under the condition of high-located hard-thick (HLHT) stratum of one coal mine, along with the similar material simulation and theoretical analysis, the characteristics of bed separation development and cracks distribution under the HLHT stratum are studied. This paper proposes a discriminating method for overlying strata Three Zones considering the influence of HLHT stratum. The development laws of cracks and disaster-causing mechanism of hard-thick magmatic rock in different strata are respectively analyzed. The studies show that in line with the working face advancing direction, the height of bed separation under the magmatic rock increases in the trend of “Increase–Stability–Decrease”, and the width of bed separation increases linearly. The width of bed separation reaches the maximum before the first breaking of magmatic rock, the bed separation completely closes after the breaking. There are no obvious bed separations during the period migration of magmatic rock. Along the direction of the height of roof, the development of bed separation is characterized by bottom-up jump based on the key strata. The analyzed results of “Three zone” height obtained by the discriminate method of overlying strata Three Zones which is based on the key strata theory and the S–R instability theory are in line with the actual facts. When the hard-thick magmatic rock is in the fractured zone, large amounts of gas and water are easy to accumulate in the bed separation space and “O” ring space around the gob. The first breaking of magmatic rock may induce bed separation gas outburst and water inrush. When the hard-thick magmatic rock is in the sagging zone, the long-term stability of magmatic rock will not cause serious disasters. But with the adjacent working face mining, bed separation gas and water often become a safety hazard.  相似文献   

Petrophysical characterisation of tight sandstone gas reservoirs using nuclear magnetic resonance: a case study of the upper Paleozoic strata in the Kangning area,eastern margin of the Ordos Basin,China     

Y. Y. Huyan  T. S. Liu  F. J. Jiang  X. Z. Chen  X. Q. Ma 《Australian Journal of Earth Sciences》2018,65(6):863-875

Residual and movable porosity are significant parameters for characterising petrophysical properties, especially in tight reservoirs. Eight tight sandstone samples from the upper Paleozoic gas-bearing strata in the Kangning area, from the eastern margin of the Ordos Basin, were analysed using nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), petrography, and porosity and permeability tests. The lithology and pore types were identified and classified using petrography and SEM. The residual and movable porosity were obtained with NMR. In addition, NMR was used to visualise pore structure and pore size distribution. The results suggest that the upper Paleozoic sandstones in the study area mainly comprise feldspathic litharenite and litharenite. The sandstone porosity and permeability are low, with means of 5.9% and 0.549 mD, respectively. Four pore types exist in the tight sandstones: residual primary pores, grain dissolution pores, micropores (clay-dominated) and microfractures. The T₂ spectra under water-saturated conditions correlate with pore size and can be used to distinguish small and large pores based on the transverse relaxation time cutoff value of 10 ms, which corresponds to a pore diameter of 0.232 μm. Small pores account for 72% of the pores in the tight sandstones. The continuous bimodal T₂ spectra suggest good connectivity between small and large pores, despite the low porosity and permeability. In this study, the movable porosity of the major tight sandstone gas reservoirs is higher than the residual porosity, which confirms the effective evaluation of movable porosity to tight sandstone reservoirs, based on NMR experiments.  相似文献   

川北地区寒武系筇竹寺组钙质结核裂缝充填物特征及指示意义   总被引：1，自引：0，他引：1  

冯明友  郑江  刘田  刘小洪  张家强  梅文华  孙霓源  龙涛 《地质论评》2018,64(3):711-722

川北地区寒武系筇竹寺组钙质结核泥页岩中早成岩期钙质结核较发育,结核裂缝中见多期次矿物充填。为揭示钙质结核裂缝形成机理,本次结合岩石学特征及地球化学特征等开展系统研究。川北筇竹寺组钙质结核裂缝中见三~四期矿物充填。第一期微晶方解石表面较脏,阴极发光暗淡,δ13C_(PDB)、δ18O_(PDB)平均值分别为-4.26‰及-7.69‰;第二期为细—中晶粒状方解石充填,阴极发光为橘黄色,流体包裹体均一温度为平均值为86.4℃,δ13C_(PDB)、δ18O_(PDB)平均值分别为-3.15‰及-7.41‰;第三期为粗晶方解石充填阴极发光暗淡,流体包裹体均一温度平均值为96.6℃,δ~(13)C_(_(PDB))、δ~(18)O_(_(PDB))平均值分别为-1.73‰及-10.28‰;第四期为重晶石充填。结合区域构造史—热演化史分析表明,钙质结核裂缝中四期充填物分别指示早期脱水、烃源岩早成熟期生烃、加里东构造运动抬升释压及深埋藏期硫酸盐热还原作用事件。  相似文献   

四川盆地：周缘活动主控下形成的叠合盆地   总被引：1，自引：0，他引：1       下载免费PDF全文

刘树根 邓宾孙玮  钟勇李智武  李金玺姜磊 《地质科学》2018,(1):308-326

四川盆地位于扬子板块西缘和青藏高原东缘,地震勘探资料等揭示盆地前寒武纪基底保存完整的古俯冲带和地堑-地垒结构,说明盆地基底后期构造活动非常稳定;显生宙以来经历晚震旦世-石炭纪、二叠纪-中三叠世两幕克拉通边缘强拉张-强挤压,而克拉通内弱拉张-弱挤压的构造演化过程,体现出盆地内部稳定性结构沉积演化特征。克拉通内弱拉张初期以海相碳酸盐岩大面积稳定沉积（即震旦系灯影组和二叠系栖霞-茅口组）和随后的风化壳岩溶作用（即桐湾期、东吴期等不整合面）为特征,弱拉张期以拉张槽（如：绵阳-长宁拉张槽和开江-梁平拉张槽等）的形成为典型特征;弱挤压则以古隆起（如：加里东期乐山-龙女寺古隆起、印支期泸州古隆起等）的发育为典型特征。四川盆地晚三叠世后的前陆盆地演化阶段受控于其周缘造山带逆冲推覆构造活动,是现今地貌和构造盆地的主要建造期,形成了四川盆地周缘突变（线型）和渐变（弥散型）两种盆山结构。盆地西边界（龙门山）和北边界（米仓山-大巴山）即是线型突变边界,也是扬子地块（板块）的边界,边界几何形状和扬子板块刚性特征对盆山系统结构-构造特征等有较大的控制作用;四川盆地的东边界（齐岳山-大娄山）和西南边界（大凉山）即是渐变弥散型边界,同时也是板（陆）块内部的边界,它们受控于邻区（盆外）的构造变形和盆内沉积盖层中滑脱层的分布特征。受控于盆地（克拉通）周缘活动,四川盆地垂向上前寒武纪基底与盖层、盖层内早期和晚期构造具解耦特征。基底与盖层构造的解耦有利于盆地内部前寒武纪基底结构构造的保存和盖层内大型隆-坳结构的形成演化;盖层内早期和晚期构造的解耦有利于早期构造免遭后期破环,对深层油气藏的保存意义重大。总之,四川盆地可能是具独特形成过程和特征的叠合盆地新类型,其突出特征表现为周缘活动、内部稳定及早期和晚期构造解耦。  相似文献   

Acquiring high-resolution topography and performing spatial analysis of loess landslides by using low-cost UAVs   总被引：1，自引：0，他引：1  

Sheng Hu  Haijun Qiu  Xingang Wang  Yu Gao  Ninglian Wang  Jiang Wu  Dongdong Yang  Mingming Cao 《Landslides》2018,15(3):593-612

The Loess Plateau is a region in China prone to frequent geological disasters, where thousands of loess landslides can be found. Conventional field survey methods are inadequate for the requirements of fine spatial analysis of landslides. Due to its numerous advantages (fast, efficient, low cost, safe, and able to acquire high-resolution data), structure from motion (SfM) technique to photogrammetric orientation of flights and modeling applied to photographs taken by unmanned aerial vehicles (UAVs) equipped with a camera has become a powerful new tool for the generation of high-resolution topography that has emerged in recent years, which has become a powerful new technique for acquiring high-resolution topographic data. In this study, we conducted nearly two months of field UAV surveys of loess landslides on the Loess Plateau, eventually established 3D digital models for 11 loess landslides, and produced high-resolution digital orthophoto maps (DOMs) and digital elevation models (DEMs). High-resolution spatial analysis of the loess landslides (mainly including characteristic parameter extraction, topography profile analysis, surface feature analysis, and hydrologic analysis) was performed using Agisoft PhotoScan, ArcGIS 10.2, Global Mapper 17, and Origin Pro 9.0. The UAV technique allows us to further understand the micro-level internal spatial and structural characteristics of loess landslides. Moreover, not only does it allow us to accurately measure the characteristic geometric parameters but also enables us to detect the surface details of loess landslides (e.g., textures, fissures, and micro-landforms). Manifestly, we can also deduce the original structural characteristics and possible inducement mechanism of landslides based on a combination of high-resolution data acquired by UAVs, proper ground surveys, and theoretical knowledge. In summary, the low-cost UAVs are highly and especially suitable for surveys and digital terrain analysis of landslides on the Loess Plateau with sparse vegetation.  相似文献   

1990—2020年中国能源开采和加工场地多源数据综合制图与时空变化分析     

郭长庆  迟文峰  匡文慧  窦银银  傅舒婧  雷梅 《地球信息科学学报》2022,24(1):127-140

由于当前缺乏有效的能源开采和加工场地精细化遥感探测方法和高精度的数据产品,全国尺度的能源开采和加工场地时空分布规律的认识仍显不足。本研究基于高分辨率遥感影像、土地利用/覆盖数据、网络爬虫数据、OSM地图数据和环境专题数据等信息,发展了基于多源数据融合和专家知识参与获取的能源开采和加工场地遥感识别和精细化制图的技术方法,研发了1990、2000、2010和2020年共4期的中国能源开采和加工场地分布数据产品及2010—2020年场地植被恢复信息数据产品,作为中国土地利用/覆盖变化数据的组成部分（CLUD-Mining）。CLUD-Mining具有较高的质量和可靠性,数据产品平均精度为91.75%;中国能源开采和加工场地开发建设的面积呈现先增长后减少的发展趋势,1990—2010年,面积增长速度从55.22 km²/a上升到95.51 km²/a,而2010—2020年呈现负增长,平均每年减少27.28 km²;此外,2010—2020年场地植被恢复面积达746.76 km²,主要集中在华北区和西南区;中国能源开采和加工场地分布格局逐渐由东部地区向西部地区转移。本研究对提升中国能源开采和加工场地时空分布特征的认识具有重要意义,可为场地污染治理和生态修复提供重要的数据基础。  相似文献